Product Description
Product Description
Genuine original air end system
·Original CZPT air end
·The third generation screw rotor profile, 5:6 asymmetric rotor
·Large rotor, low rotation speed, low specific power
·Sweden CZPT element bearings ensure the ultra-long service life of the air end
High efficiency permanent magnet motor
·Using high-performance permanent magnets, no loss of magnetism at 200°C
·IE3 Premium Efficiency
·IP55 degree of protection, Class F insulation, Class B temperature rise
·High transmission efficiency, service life of up to 15 years
High-efficiency air filter
·Filtration accuracy up to 99.5%
·Dust particles below 0.1 micron
·Service life up to 3000 hours
High-efficiency oil filter
·Filtration accuracy up to 99.5%
·Oil particles can be controlled at 0.1 micron
·Service life up to 3000 hours
High-efficiency oil gas tank
·Oversized oil gas tank improves the cyclone effect maximizing the separation process
·The high-efficiency oil gas separator ensures that the oil content is less than 2ppm
·System pressure drop is less than 0.2bar
·Service life of oil gas separator is up to 3000 hours
Energy-saving air inlet valve
·Large suction area
·Low load energy consumption in unloaded operation
·Cast aluminum maintenance free design
·Fast check: prevent unloading and shutdown oil injection
Classic cooler design
·Oversized cooler design
·Easy access for maintenance
·Anti-corrosion coating on surface
High-quality cooling fan
·Compact
·Low noise level
·High capacity for optimized cooling
·Low power consumption
Highly integrated microcomputer controller
·7.0 inch full color touch screen
·Full graphical flow diagram
·Multiple languages
·Real-time operation/maintenance/alarm information
·Operation record/chart display
·Weekly and daily scheduling, service history and plHangZhou
·On board RS485 interface, Modbus RTU
Product Parameters
| Model | Motor Power | Maximum Working Pressure | Free Air Delivery | Air Outlet Pipe Diameter | Weight | Dimensions(L*W*H) | |||
| kW | hp | bar(g) | psig | m³/min | cfm | kg | mm | ||
| BG10A | 7.5 | 10 | 7 | 102 | 1.2 | 42 | G1/2″ | 190 | 900*650*850 |
| 8 | 116 | 1.1 | 39 | ||||||
| 10 | 145 | 0.9 | 32 | ||||||
| 13 | 189 | 0.7 | 25 | ||||||
| BG15A | 11 | 15 | 7 | 102 | 1.7 | 60 | G3/4″ | 320 | 1060*750*1000 |
| 8 | 116 | 1.6 | 57 | ||||||
| 10 | 145 | 1.3 | 46 | ||||||
| 13 | 189 | 1.0 | 35 | ||||||
| BG20A | 15 | 20 | 7 | 102 | 2.4 | 85 | G3/4″ | 340 | 1060*750*1000 |
| 8 | 116 | 2.2 | 78 | ||||||
| 10 | 145 | 2.0 | 71 | ||||||
| 13 | 189 | 1.6 | 57 | ||||||
| BG25A | 18.5 | 25 | 7 | 102 | 3.1 | 109 | G1″ | 400 | 1150*850*1140 |
| 8 | 116 | 2.9 | 102 | ||||||
| 10 | 145 | 2.7 | 95 | ||||||
| 13 | 189 | 2.2 | 78 | ||||||
| BG30A | 22 | 30 | 7 | 102 | 3.6 | 127 | G1″ | 430 | 1150*850*1140 |
| 8 | 116 | 3.4 | 120 | ||||||
| 10 | 145 | 3.2 | 113 | ||||||
| 13 | 189 | 2.7 | 95 | ||||||
| BG40A | 30 | 40 | 7 | 102 | 5.2 | 184 | G1″ | 460 | 1150*850*1140 |
| 8 | 116 | 5.0 | 177 | ||||||
| 10 | 145 | 4.0 | 141 | ||||||
| 13 | 189 | 3.1 | 109 | ||||||
| BG50A | 37 | 50 | 7 | 102 | 6.4 | 226 | G1-1/2″ | 650 | 1350*1000*1340 |
| 8 | 116 | 6.3 | 222 | ||||||
| 10 | 145 | 5.4 | 191 | ||||||
| 13 | 189 | 4.7 | 166 | ||||||
| BG60A | 45 | 60 | 7 | 102 | 7.3 | 258 | G1-1/2″ | 700 | 1350*1000*1340 |
| 8 | 116 | 7.2 | 254 | ||||||
| 10 | 145 | 6.2 | 219 | ||||||
| 13 | 189 | 5.7 | 201 | ||||||
| BG75A | 55 | 75 | 7 | 102 | 9.5 | 335 | G2″ | 1050 | 1700*1200*1550 |
| 8 | 116 | 9.4 | 332 | ||||||
| 10 | 145 | 8.2 | 290 | ||||||
| 13 | 189 | 6.7 | 237 | ||||||
| BG100A | 75 | 100 | 7 | 102 | 12.4 | 438 | G2″ | 1100 | 1700*1200*1550 |
| 8 | 116 | 12.2 | 431 | ||||||
| 10 | 145 | 10.8 | 381 | ||||||
| 13 | 189 | 9.1 | 321 | ||||||
| BG125A | 90 | 125 | 7 | 102 | 15.4 | 544 | G2″ | 1500 | 2100*1300*1650 |
| 8 | 116 | 15.0 | 530 | ||||||
| 10 | 145 | 13.3 | 470 | ||||||
| 13 | 189 | 11.4 | 403 | ||||||
| BG150A | 110 | 150 | 7 | 102 | 20.1 | 710 | DN80 | 2650 | 2500*1650*1900 |
| 8 | 116 | 19.9 | 703 | ||||||
| 10 | 145 | 16.3 | 576 | ||||||
| 13 | 189 | 14.5 | 512 | ||||||
| BG180A | 132 | 180 | 7 | 102 | 23.4 | 826 | DN80 | 2800 | 2500*1650*1900 |
| 8 | 116 | 23.0 | 812 | ||||||
| 10 | 145 | 19.7 | 696 | ||||||
| 13 | 189 | 16.0 | 565 | ||||||
| BG220A | 160 | 220 | 7 | 102 | 27.5 | 971 | DN80 | 3950 | 3000*1900*1950 |
| 8 | 116 | 27.0 | 954 | ||||||
| 10 | 145 | 22.5 | 795 | ||||||
| 13 | 189 | 21.0 | 742 | ||||||
| BG250A | 185 | 250 | 7 | 102 | 30.5 | 1077 | DN80 | 4100 | 3000*1900*1950 |
| 8 | 116 | 29.5 | 1042 | ||||||
| 10 | 145 | 27.0 | 954 | ||||||
| 13 | 189 | 22.5 | 795 | ||||||
| BG300A | 220 | 300 | 7 | 102 | 38.0 | 1342 | DN100 | 5000 | 3600*2200*2200 |
| 8 | 116 | 37.0 | 1307 | ||||||
| 10 | 145 | 33.0 | 1165 | ||||||
| 13 | 189 | 28.5 | 1006 | ||||||
| BG340A | 250 | 340 | 7 | 102 | 44.0 | 1554 | DN100 | 5900 | 3600*2200*2200 |
| 8 | 116 | 42.5 | 1501 | ||||||
| 10 | 145 | 37.5 | 1324 | ||||||
| 13 | 189 | 31.5 | 1112 | ||||||
| BG420A | 315 | 420 | 7 | 102 | 56.0 | 1978 | DN125 | 6500 | 4000*2300*2300 |
| 8 | 116 | 54.0 | 1907 | ||||||
| 10 | 145 | 49.0 | 1730 | ||||||
| 13 | 189 | 43.0 | 1519 | ||||||
Company Profile
Wallboge is a high-tech enterprise and is considered 1 of the leading manufacturers of air compressor products in China. Our goal is to provide exceptional customer service coupled with quality products and energy saving solutions.
Wallboge’ s primary businesses focus in following key areas:
Integrated screw air compressor for laser cutting
Permanent magnet variable frequency screw air compressor
Two-stage compression permanent magnet variable frequency screw air compressor
Low pressure two-stage compression permanent magnet variable frequency screw air compressor
Low pressure permanent magnet variable frequency screw air compressor
Water-lubricated oil-free screw air compressor
Fixed speed screw air compressor
Oil-free screw blower
Screw vacuum pump
At Wallboge, we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air products for all industries. All of our products are designed for reliable performance, easy maintenance, and maximum energy efficiency. CZPT has been exporting to more than 150 countries across the globe.
Wallboge continuously innovates product development and management to meet customers’ demand. The powerful enterprise culture and continuous innovation make CZPT improved rapidly. Wallboge’ s vision is to be a world-renowned high-end energy-saving machinery brand, with sustainable development, constantly improving its own value and sharing it with our customers and staff, committed to continuously satisfying the needs of global companies by providing a full range of industrial air compression solutions.
Certifications
Exhibitions
After Sales Service
1. 24/7 after sales service in different languages.
2. Online instruction for installation and commissioning.
3. On-site instruction for installation and commissioning provided by well-trained engineers or local authorized service center.
4. CZPT agents and after sales service available.
Our Advantages
1. Proven product quality.
2. Factory direct prices.
3. On-time delivery.
4. Prompt technical support in different languages before sales, in sales and after sales.
5. Small orders accepted to check quality first.
6. OEM & ODM service available.
FAQ
Q1: Are you a factory or a trading company?
A1: We are a factory. Please check our Company Profile.
Q2: What is the exact address of your factory?
A2: No. 588, East Tonggang Road, Shaxi Town, HangZhou City, ZheJiang Province, China
Q3: What is your delivery time?
A3: For standard voltage, the delivery time is 15 working days after you confirm the order. For non-standard voltage, please contact our sales to confirm the delivery time.
Q4: What kind of payment terms do you accept?
A4: We accept T/T, L/C at sight.
Q5: How long is the warranty of your air compressor?
A5: 2 years for the whole air compressor except consumable spare parts.
Q6: How long could your air compressor be used?
A6: Generally, more than 10 years.
Q7: What is your MOQ requirement?
A7: 1 unit.
Q8: Can you offer OEM & ODM service?
A8: Yes, with a professional design team, we can offer OEM & ODM service.
| After-sales Service: | Engineers Available to Overseas Service. |
|---|---|
| Warranty: | 2 Years |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Structure Type: | Closed Type |
| Customization: |
Available
|
|
|---|
Choosing the Right Air Compressor For Your Home
You will find that air compressors are indispensable tools for a variety of situations, including garages, home workshops, and basements. These tools can power a variety of tools, and each model is sized to suit the job at hand. Because air compressors have only one motor, they are lightweight, compact, and easy to handle. Using one air compressor to power several tools will also reduce the wear and tear on individual components. This article will introduce some important characteristics to look for when choosing the right air compressor for your home.
Positive displacement
A positive displacement compressor applies pressure to a fluid, whereas a centrifugal one does the opposite. A positive displacement compressor creates the desired pressure by trapping air and increasing its volume. Its discharge valve releases the high-pressure gas. These compressors are used in industrial applications and nuclear power plants. The difference between a positive and negative displacement compressor is that a positive displacement compressor can compress and release air at a consistent rate.
A positive displacement air compressor uses a reciprocating piston to compress air. This reduces the volume of the air in the compression chamber, and a discharge valve opens when the pressure reaches the desired level. These compressors are used in bicycle pumps and other pneumatic tools. Positive displacement air compressors have multiple inlet ports and have several configurations. Positive displacement air compressors have a single-acting and double-acting piston, and can be oil-lubricated or oil-free.
A positive displacement air compressor is different from a dynamic compressor. It draws air into the compression chambers and then releases the pressure when the valve is opened. Positive displacement compressors are common in industrial applications and are available in single-acting, double-acting, and oil-lubricated models. Large piston compressors have ventilated intermediate pieces and crossheads on gudgeon pins. Smaller models have permanently sealed crankcases with bearings.
Oil-free
Oil-free air compressors have some advantages over their oil-lubricated counterparts. They do not require lubrication oil because they are coated with Teflon. The material has one of the lowest coefficients of friction and is layered, so it slides past other layers with little effort. Because of this, oil-free compressors tend to be cheaper and still deliver comparable performance. Oil-free compressors are a good choice for industrial applications.
The life of an oil-free air compressor is significantly longer than an oil-lubricated counterpart. These models can operate up to 2,000 hours, four times longer than the average oil-lubed compressor. Oil-free compressors also have a significantly lower operating noise than their oil-lubricated counterparts. And because they don’t need oil changes, they are quieter. Some even last up to 2,000 hours.
An oil-free air compressor is a good choice if your application requires high levels of purity. Several applications require ultra-pure air, and even a drop of oil can cause product spoilage or damage to production equipment. In addition to the health risks, an oil-free air compressor reduces the costs associated with oil contamination and minimizes leaks. It also eliminates the need for oil collection, disposal, and treatment.
A typical oil-free air compressor is very efficient, requiring only about 18% of the full load horsepower. However, oil-free compressors have a higher risk of premature failure and are not recommended for large-scale industrial applications. They may also use up to 18% of the compressor’s full capacity. They may sound appealing, but you must make sure you understand the benefits of an oil-free air compressor before choosing one for your industrial applications.
Single-stage
A single-stage air compressor is designed to provide the power for a single pneumatic tool or device. These machines are generally smaller than two-stage compressors and produce less heat and energy. These machines aren’t designed for heavy-duty industries, but they are still highly effective for a variety of applications, including auto shops, gas stations, and various manufacturing plants. They can also be used in borewells, as they are suitable for small spaces with low air flow requirements.
A single-stage air compressor has one cylinder and two valves – the inlet and the delivery valves. Both of these valves function mechanically, with the inlet valve controlling torque and the delivery one controlling air pressure. Generally, single-stage compressors are powered by a gas engine, but there are also electric models available. The single-stage air compressor is the most common type of air compressor. It has a single cylinder, one piston, and one air cylinder.
The single-stage air compressors are used for small projects or personal use. A two-stage air compressor is more effective for industrial projects. Its longer air end life makes it more efficient. It is also more efficient for use in the automotive industry, where the engine has many cylinders. In general, single-stage compressors require a higher power level. The single-stage model is ideal for small projects, while a two-stage one is suitable for larger-scale arsenals.
CFM
The cubic foot-per-minute (CFM) of an air compressor is the output of the machine. In order to calculate the CFM level, start by looking at the compressor’s specifications. You should know how many cubic feet the unit can hold and how many pounds per square inch it can compress. Once you have these information, you can calculate the CFM. Now you can use these numbers to select an appropriate air compressor for your needs.
The most common way to increase the CFM of an air compressor is to turn the regulator down. By turning the dial down, the air compressor will produce more than 10 CFM. You can also try connecting two output valves. Make sure that the settings are adjusted properly before you begin. This will ensure that your air compressor is functioning at its maximum efficiency and lifespan. To increase the CFM of your air compressor, first check that your regulator is calibrated for the desired pressure level.
To calculate the CFM of an air compressor, first determine the tank volume of the machine. Then, multiply this volume by the time it takes to fill the tank. Then, divide the result by 60 seconds to calculate the CFM. Once you know how much air your machine can hold, you can choose a suitable air compressor. If you’re working in a confined area, you should buy a tool with a large tank.
PSI
The PSI of an air compressor is the pressure that it can output. A typical air compressor has a gauge connected to the airline at the bottom, next to it, or between the two. The gauge tells the actual pressure of the air compressor, while the cut-out pressure is determined by the manufacturer. The manufacturer recommends that you set the cut-out pressure twenty to forty PSI higher than the factory recommended pressure. If you want to set the pressure for your nail gun, you can use the cut-in and cut-out pressures on your compressor, and the tank won’t exceed this range.
The PSI of an air compressor measures the force that it can deliver, which is often in pounds per square inch. For most air tools, you need at least forty to 90 psi. In general, reciprocating air compressors work on an on/off basis. This relationship is known as the duty cycle. All air compressors are rated for a particular duty cycle, such as fifty percent on and twenty-five percent off.
The Psig of an air compressor is not free, as many people believe. The PSI of an air compressor is not free, but it is essential to maintain it for safe operations. If you’re having trouble maintaining a consistent pressure, consider turning down the PSI of your compressor by 2 psig. This will determine the critical pressure for the machine. You’ll also increase the amount of energy in the system by one percent.
Power source
The power source for an air compressor is crucial in its operation. Without the correct voltage and amperage, air compressors will not function properly. The power source must be close to the compressor so that it can plug into an electrical outlet. If it is too far from the outlet, the compressor may not be able to build enough pressure. When this happens, the fuse inside the air compressor will turn off to protect the user. The power source should be a safe distance from the compressor.
Most manufacturers do not specify the power source for an air compressor. Depending on the horsepower, the compressor will require approximately four amps of power. A one-horsepower compressor would draw about twelve amps. If it were powered by a typical 120-volt household supply, its motor would exceed the 15-amp breaker capacity. A larger air compressor, however, will require a separate 15-amp power source, making it impossible to use it with this type of power source.
The power source for an air compressor is typically electrical alternating current (AC) that is equivalent to the voltage on a standard wall outlet. A three-phase air compressor, on the other hand, requires a special AC supply with three electrical offset pulses. Regardless of the type of air compressor, the power source must be compatible with the incoming power service. One of the most common problems when attempting to connect an air compressor to an AC power source is undersized wire. This results in low voltage and high amperes, tripping of over-load relays and blown fuses.
editor by CX 2023-06-07
China manufacturer 15kw 20HP 8 10 Bar All in One Screw Air Compressor air compressor portable
Product Description
ALL IN ONE TYPE SCREW AIR COMPRESSOR
* High efficiency power-saving
* Permanent magnet motor
* Frequency Inverter
* Saving space
|
Model |
Power KW |
Power HP |
Air flow L/min |
Pressure bar |
Tank |
Drive Mode |
|
SG-10E |
7.5 |
10 |
0.8 |
8-12 |
250L |
Direct |
| SG-15E |
11 |
15 |
0.85 |
8-16
|
340L |
Direct |
|
SG-20E |
15 |
20 |
1.35 |
340L |
Direct |
|
|
SG-30E |
22 |
30 |
1.8 |
480L |
Direct |
FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company.
Q2: How about the warranty terms of your machine?
A2: One year for the whole machine and 2 years for screw air end, except consumble spare parts.
Q3: Could you provide some spare parts of the machines?
A3: Yes, we can offer.
Q4: What about product package?
A4: We will pack the products strictly with standard wooden carton.
Q5: Can you customized the voltage of products?
A5: Yes, the voltage can be customized according to your requirement. Like 380V/60HZ, 415V/50HZ, 220V/60HZ and so on.
Q6: Can you provide samples?
A6: Yes, we cam provide samples.
Q7: How long will you take to arrange production?
A7: Regular model within 7-15 days. Customized model within 25-30 days.
Q8: How about your customer service?
A8: 24 hours on-line service available. 48 hours problem solved promise.
Q9: Which payment term can you accept?
A9: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q10: Which trade term can you accept?
A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.
| After-sales Service: | Online Service |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Vertical |
| Samples: |
US$ 2800/unit
1 unit(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
A Buyer’s Guide to Air Compressor Types
There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
Single-stage air compressors
A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.
Rotary vane compressors
Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
Rotary vane compressors with low-noise models
If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
Rotary vane compressors with two pistons
The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.
editor by CX
2023-04-14
China 20HP Screw Air Compressor Plate Heat Exchanger Air Compressor Cooler air compressor portable
Item Description
Refrigerated Compressed Air Dryer (Created-In Pre-Cooler)
Thorough Photos
Basic principle of doing work :
The amount of water vapor in the air compression by compressed air temperature determined: in scenario of compressed air stress is fundamentally the same, reduce the temperature of the air compressed compression to minimize the volume of h2o vapor in the air, and the excessive drinking water vapor will condense into liquid.
Freezing dryer is in accordance to the corresponding connection among the saturation h2o vapor force and temperature, use refrigeration unit helps make the compressed air is cooled to a certain dew point temperature, precipitation made up of water, by means of the steam drinking water separator and electric drainage unit will discharge water, so that the compressed air can be dry.
Solution Parameters
| Product |
Air Ability (Nm3/min) |
Voltage (V) |
Enthusiast Power (W) |
Air connector dia | Web fat (Kg) |
Lenghth (mm) |
Wideth (mm) |
Peak (mm) |
Air flow (Nm3/n) |
| SDLF-.5HT | .sixty five | 220 | eighty | G1″ | fifty four | four hundred | 560 | 730 | 820 |
| SDLF-1HT | one.two | 220 | 80 | G1″ | fifty seven | 400 | 560 | 730 | 820 |
| SDLF-2HT | 2.5 | 220 | 100 | G1″ | sixty six | 520 | 640 | 890 | 1640 |
| SDLF-3HT | three.six | 220 | 135 | G1″ | seventy nine | 520 | 640 | 890 | 2670 |
| SDLF-4.5HT | five. | 220 | 250 | G1-1/2″ | 86 | 540 | seven hundred | 1000 | 4650 |
| SDLF-6HT | six.eight | 220 | 250 | G1-1/2″ | ninety | 540 | seven-hundred | a thousand | 4650 |
| SDLF-8HT | eight.5 | 220 | 270 | G2″ | ninety nine | 610 | 900 | 1070 | 5700 |
| SDLF-10HT | ten.nine | 380/220 | 260 | G2″ | 113 | 610 | 900 | 1070 | 5700 |
| SDLF-12HT | 12.eight | 380/200 | 260 | G2″ | 113 | 610 | 900 | 1070 | 5700 |
Be aware: The over designs use plate/plate-fin heat exchangers.
Business Profile
Certifications
Packaging & Transport
FAQ
| After-sales Service: | Ok |
|---|---|
| Warranty: | 1 Year |
| Flow: | Cross Flow |
| Material Status: | Bulk |
| Drying Medium: | Air |
| Structure: | All Kinds |
###
| Samples: |
US$ 400/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model |
Air Capacity (Nm3/min) |
Voltage (V) |
Fan Power (W) |
Air connector dia | Net weight (Kg) |
Lenghth (mm) |
Wideth (mm) |
Height (mm) |
Air flow (Nm3/n) |
| SDLF-0.5HT | 0.65 | 220 | 80 | G1" | 54 | 400 | 560 | 730 | 820 |
| SDLF-1HT | 1.2 | 220 | 80 | G1" | 57 | 400 | 560 | 730 | 820 |
| SDLF-2HT | 2.5 | 220 | 100 | G1" | 66 | 520 | 640 | 890 | 1640 |
| SDLF-3HT | 3.6 | 220 | 135 | G1" | 79 | 520 | 640 | 890 | 2670 |
| SDLF-4.5HT | 5.0 | 220 | 250 | G1–1/2" | 86 | 540 | 700 | 1000 | 4650 |
| SDLF-6HT | 6.8 | 220 | 250 | G1–1/2" | 90 | 540 | 700 | 1000 | 4650 |
| SDLF-8HT | 8.5 | 220 | 270 | G2" | 99 | 610 | 900 | 1070 | 5700 |
| SDLF-10HT | 10.9 | 380/220 | 260 | G2" | 113 | 610 | 900 | 1070 | 5700 |
| SDLF-12HT | 12.8 | 380/200 | 260 | G2" | 113 | 610 | 900 | 1070 | 5700 |
| After-sales Service: | Ok |
|---|---|
| Warranty: | 1 Year |
| Flow: | Cross Flow |
| Material Status: | Bulk |
| Drying Medium: | Air |
| Structure: | All Kinds |
###
| Samples: |
US$ 400/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model |
Air Capacity (Nm3/min) |
Voltage (V) |
Fan Power (W) |
Air connector dia | Net weight (Kg) |
Lenghth (mm) |
Wideth (mm) |
Height (mm) |
Air flow (Nm3/n) |
| SDLF-0.5HT | 0.65 | 220 | 80 | G1" | 54 | 400 | 560 | 730 | 820 |
| SDLF-1HT | 1.2 | 220 | 80 | G1" | 57 | 400 | 560 | 730 | 820 |
| SDLF-2HT | 2.5 | 220 | 100 | G1" | 66 | 520 | 640 | 890 | 1640 |
| SDLF-3HT | 3.6 | 220 | 135 | G1" | 79 | 520 | 640 | 890 | 2670 |
| SDLF-4.5HT | 5.0 | 220 | 250 | G1–1/2" | 86 | 540 | 700 | 1000 | 4650 |
| SDLF-6HT | 6.8 | 220 | 250 | G1–1/2" | 90 | 540 | 700 | 1000 | 4650 |
| SDLF-8HT | 8.5 | 220 | 270 | G2" | 99 | 610 | 900 | 1070 | 5700 |
| SDLF-10HT | 10.9 | 380/220 | 260 | G2" | 113 | 610 | 900 | 1070 | 5700 |
| SDLF-12HT | 12.8 | 380/200 | 260 | G2" | 113 | 610 | 900 | 1070 | 5700 |
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
editor by czh 2023-01-17
China Good quality CZPT 20HP Belt Screw Drive Rotary Air Compressor with high quality
Merchandise Description
Moair 20HP Belt Screw Drive Rotary Air Compressor
Parameters
one. Huge airend with low rpm for far better performance an prolonged life span.
2. CE degree safety layout and production
three. Oversize cooler suited for tropical region.
four. Clever PLC management.
5. Simple to do maintenance and support.
Q1: What ‘s your manufacturing unit address
A2: Our company is positioned in NO.88 CZPT Street,HangZhou ,ZheJiang ,China
Q2: How prolonged is our shipping
A2: Our standard supply time is 30-40 days right after affirmation get & acquiring recipets for standard compressors, for the other non common need will be reviewed case by circumstance.
Q3: Can you take OEM orders?
A3: Yes, with skilled design staff, OEM orders are hugely welcome.
| Model : | MFB20A |
| Type: | Oil Injected Belt Driven Screw Air Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~12.5 bar |
| Capacity: | 1.9~3.0m3/min |
| Color: | Blue/grey |
| Driven Method: | Belt Driven |
| Trademark: | Moair |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO |
| Origin: | China |
| application: | Casting , Metal , Plastic , Rubber |
| Model : | MFB20A |
| Type: | Oil Injected Belt Driven Screw Air Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~12.5 bar |
| Capacity: | 1.9~3.0m3/min |
| Color: | Blue/grey |
| Driven Method: | Belt Driven |
| Trademark: | Moair |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO |
| Origin: | China |
| application: | Casting , Metal , Plastic , Rubber |
Choosing an Air Compressor
Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
Positive displacement
There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.
Oil-injected
Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
Oil-free
When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.
Single-stage
A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
Low-noise
A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.
China Standard 1.5m3/Min11kw 15HP 20HP 15kw Screw Air Compressor with Air Dryer with Best Sales
Item Description
New Arrival
10hp,15hp,20hp Totally free Air Filter, Cost-free Oil Filter, Free of charge separator
7.5kw 11kw 15kw 37kw 55kw 90kw 132kw crew Air Compressors
1.Pictures
2.Complex data
3. Technical specs
4. Features
Considerably less components, no consumables:
reputable longtime managing, which is utilized to industries as metallurgy, mine, mechanical, construction, foods etc
Minimal noise and lower operating price:
Our screw compressors implement imported bearing, rotor is harmony examined good by equilibrium machine, there is small vibration and lower sounds
Minimal oil use:
The oil-dampness separator is important part for screw compressor, CZPT screw compressor applies most superior separator, technological info is controlled reliable, oil usage is managed beneath 3ppm
Smart micro pc manage technological innovation is understood for entirely monitored and instructed by operators, and it can operates with no-male procedure due to distant handle. The instruction and information is shown on the monitor panel, and it can detects faults automatically and gives an alarm, and change air flow automatically
Block:
German style block, 0 vibration, minimal sounds, massive rotor, minimal RPM, immediate pushed. Rotor is 5:6 unbalanced line high performance..
Cooler:
cooler is assembled with filtration display which keeps clear in the cooler
Motor:
high performance motor ensures the screw compressor operated in negative environments
Bearing:
Sweden CZPT bearing, anti-friction anti-corrosion
Pipes:
European materials large temperature 135celsius and substantial stress resistance, no leakage
ZheJiang UFo Compressor & System Co.,Ltd
Include: 206,1506 LianhangRoad,Xihu (West Lake) Dis. district,ZheJiang ,China
TAX ID No.9131D
| Type | SSD-15A | SSD-20A | SSD-25A | SSD-30A | SSD-50A | SSD-75A | |
| Motor power | Kw/hp | 11/15 | 15/20 | 18.5/25 | 22/30 | 37/50 | 55/75 |
| Air Volume | (m3/m)/Mpa | 1.65/0.7 | 2.25/0.7 | 3.22/0.7 | 3.6/0.7 | 6.58/0.7 | 10.8/0.7 |
| 1.53/0.8 | 2.03/0.8 | 3.01/0.8 | 3.56/0.8 | 6.26/0.8 | 10.1/0.8 | ||
| 1.32/1 | 1.82/1 | 2.52/1 | 3.07/1 | 5.8/1 | 8.5/1 | ||
| 1.1/1.2 | 1.55/1.2 | 2.3/1.2 | 2.84/1.2 | 5.06/1.2 | 7.69/1.2 | ||
| Cooling mode | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | |
| Drive mode | Directly connected | ||||||
| Starting mode | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | |
| L×W×H (mm) |
L | 950 | 950 | 1150 | 1250 | 1500 | 2045 |
| W | 800 | 800 | 900 | 750 | 970 | 1250 | |
| H | 1140 | 1140 | 1260 | 1110 | 1340 | 1705 | |
| Net weight | Kg | 400 | 440 | 510 | 550 | 770 | 1750 |
| Noise | dB(A) | 63±2 | 63±2 | 63±2 | 63±2 | 63±2 | 65±2 |
| Diameter of outlet pipe | G3/4″ | G3/4″ | G11/4″ | G11/4″ | G11/2″ | G2″ | |
###
| SSD-100A | SSD-120A | SSD-150A | SSD-175A | SSD-200A | SSD-250A | SSD-300A | SSD-350A |
| 75/100 | 90/120 | 110/150 | 132/175 | 160/200 | 185/250 | 220/300 | 250/350 |
| 13.5/0.7 | 16.2/0.7 | 21.6/0.7 | 25.2/0.7 | 28.7/0.7 | 32.5/0.7 | 36.8/0.7 | 42.7/0.7 |
| 12.7/0.8 | 15.2/0.8 | 20.1/0.8 | 24/0.8 | 27.6/0.8 | 30.8/0.8 | 34.7/0.8 | 40.8/0.8 |
| 11.3/1 | 14.3/1 | 17.5/1 | 21/1 | 25.3/1 | 28.2/1 | 30.8/1 | 38.1/1 |
| 10/1.2 | 12.9/1.2 | 16/1.2 | 18.3/1.2 | 22.4/1.2 | 25.1/1.2 | 28.9/1.2 | 34.9/1.2 |
| Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled |
| Directly connected | |||||||
| Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ |
| 2045 | 2329 | 2578 | 2578 | 2856 | 2856 | 3092 | 3092 |
| 1250 | 1516 | 1656 | 1656 | 1898 | 1898 | 1944 | 1944 |
| 1705 | 1745 | 1920 | 1920 | 1895 | 1895 | 2143 | 2143 |
| 1820 | 2200 | 2950 | 3550 | 3880 | 4050 | 4700 | 5100 |
| 68±2 | 68±2 | 68±2 | 72±2 | 72±2 | 72±2 | 76±2 | 76±2 |
| G2″ | DN65 | DN65 | DN65 | DN80 | DN80 | DN80 | DN80 |
###
| No. | Part Name | Manufacturer or Brand |
| 1 | Air end | Baosi |
| 2 | Pressure sensor | Yishun, Shenzhen |
| 3 | Temperature sensor | Yishun, Shenzhen |
| 4 | intake valve | Red star,Nantong |
| 5 | Starting panel | Schneider |
| 6 | Frequency converter | Zhongchen |
| 7 | PLC Controller (English) | PLOT,Shenzhen |
| 8 | Contactor | Schneider |
| 9 | Motor | Huaxin, Lihao |
| 10 | air filter | HD |
| 11 | Oil filter | HD |
| 12 | Oil-air separator element | HD |
| 13 | Min. pressure valve | Red star,Nantong |
| 14 | Air Cooler | Yaqi |
| 15 | Oil tank | Jiangnan vessel |
| 16 | Safety valve | Fuyu |
| 17 | Fan motor | Shiyibai |
| Type | SSD-15A | SSD-20A | SSD-25A | SSD-30A | SSD-50A | SSD-75A | |
| Motor power | Kw/hp | 11/15 | 15/20 | 18.5/25 | 22/30 | 37/50 | 55/75 |
| Air Volume | (m3/m)/Mpa | 1.65/0.7 | 2.25/0.7 | 3.22/0.7 | 3.6/0.7 | 6.58/0.7 | 10.8/0.7 |
| 1.53/0.8 | 2.03/0.8 | 3.01/0.8 | 3.56/0.8 | 6.26/0.8 | 10.1/0.8 | ||
| 1.32/1 | 1.82/1 | 2.52/1 | 3.07/1 | 5.8/1 | 8.5/1 | ||
| 1.1/1.2 | 1.55/1.2 | 2.3/1.2 | 2.84/1.2 | 5.06/1.2 | 7.69/1.2 | ||
| Cooling mode | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | |
| Drive mode | Directly connected | ||||||
| Starting mode | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | |
| L×W×H (mm) |
L | 950 | 950 | 1150 | 1250 | 1500 | 2045 |
| W | 800 | 800 | 900 | 750 | 970 | 1250 | |
| H | 1140 | 1140 | 1260 | 1110 | 1340 | 1705 | |
| Net weight | Kg | 400 | 440 | 510 | 550 | 770 | 1750 |
| Noise | dB(A) | 63±2 | 63±2 | 63±2 | 63±2 | 63±2 | 65±2 |
| Diameter of outlet pipe | G3/4″ | G3/4″ | G11/4″ | G11/4″ | G11/2″ | G2″ | |
###
| SSD-100A | SSD-120A | SSD-150A | SSD-175A | SSD-200A | SSD-250A | SSD-300A | SSD-350A |
| 75/100 | 90/120 | 110/150 | 132/175 | 160/200 | 185/250 | 220/300 | 250/350 |
| 13.5/0.7 | 16.2/0.7 | 21.6/0.7 | 25.2/0.7 | 28.7/0.7 | 32.5/0.7 | 36.8/0.7 | 42.7/0.7 |
| 12.7/0.8 | 15.2/0.8 | 20.1/0.8 | 24/0.8 | 27.6/0.8 | 30.8/0.8 | 34.7/0.8 | 40.8/0.8 |
| 11.3/1 | 14.3/1 | 17.5/1 | 21/1 | 25.3/1 | 28.2/1 | 30.8/1 | 38.1/1 |
| 10/1.2 | 12.9/1.2 | 16/1.2 | 18.3/1.2 | 22.4/1.2 | 25.1/1.2 | 28.9/1.2 | 34.9/1.2 |
| Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled | Air cooled |
| Directly connected | |||||||
| Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ | Y-△ |
| 2045 | 2329 | 2578 | 2578 | 2856 | 2856 | 3092 | 3092 |
| 1250 | 1516 | 1656 | 1656 | 1898 | 1898 | 1944 | 1944 |
| 1705 | 1745 | 1920 | 1920 | 1895 | 1895 | 2143 | 2143 |
| 1820 | 2200 | 2950 | 3550 | 3880 | 4050 | 4700 | 5100 |
| 68±2 | 68±2 | 68±2 | 72±2 | 72±2 | 72±2 | 76±2 | 76±2 |
| G2″ | DN65 | DN65 | DN65 | DN80 | DN80 | DN80 | DN80 |
###
| No. | Part Name | Manufacturer or Brand |
| 1 | Air end | Baosi |
| 2 | Pressure sensor | Yishun, Shenzhen |
| 3 | Temperature sensor | Yishun, Shenzhen |
| 4 | intake valve | Red star,Nantong |
| 5 | Starting panel | Schneider |
| 6 | Frequency converter | Zhongchen |
| 7 | PLC Controller (English) | PLOT,Shenzhen |
| 8 | Contactor | Schneider |
| 9 | Motor | Huaxin, Lihao |
| 10 | air filter | HD |
| 11 | Oil filter | HD |
| 12 | Oil-air separator element | HD |
| 13 | Min. pressure valve | Red star,Nantong |
| 14 | Air Cooler | Yaqi |
| 15 | Oil tank | Jiangnan vessel |
| 16 | Safety valve | Fuyu |
| 17 | Fan motor | Shiyibai |
How to Repair and Maintain an Air Compressor
A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.
Positive displacement
Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
oil free
If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
double acting
A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
fuel tank pressure switch
You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.
energy source
The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.
China factory SCR20pm2 15kw 20HP Permanent Magnetic Ie4 Efficiency Small Screw Air Compressor near me factory
Merchandise Description
Merchandise Technical Description
Item Features
one. China-Japan newest technologies cooperation, higher reliability.
2. Oil Cooling Long lasting Magnetic Motor.
3. IP65 protection grade & heavy obligation air filter, appropriate for high dusty setting.
4. IE4 Efficiency motor efficiency.
five. Most CZPT saving manner, Only function at loading.
6. Wide frequency variety twenty five%-100%.
7. Premium Magnetic substance resist more than 180ºC temp.
eight. Reputable PM motor supplier from Italy.
nine. Direct Taper connection, no transmission energy reduction, straightforward servicing.
ten.Touch Display screen PLC with preset operating plan, more clever manage.
11. Each major motor and enthusiast motor are inverter control, far more correct handle.
12. Easy for installation and provider.
thirteen. Great CZPT Preserving, preserve up to much more than 30-forty%.
Benefits
Software
About SCR
In addition,we have exported our items to a lot more than 55 countries which includes in United kingdom, United states of america, Spain and many others. because 2008. And we have also proven extended-expression connection with our companion depend on our high high quality merchandise.
In addition to, about the annual output,we can manufacture near 7,000 units compressors for each year, and all around 30% are sold to oversea market place.
FAQ
Speak to us
Business Name: ZheJiang Screw Compressor Co., Ltd
Make contact with Person: Vincent Sun
If you are intrigued in any of our goods,remember to come to feel free of charge to make contact with us.We are seeking ahead to cooperating,expanding and establishing with your sincerely.
How to Repair and Preserve an Air Compressor
A compressor is a unit utilised to go air from one place to another. Air enters the air compressor through the consumption valve. Within the compressor, the vanes on the interior rotor rotate within an eccentric cavity. The self-altering length arm divides the space into multiple cavities of various sizes. As the rotor rotates, air fills the cavity. As air flows about the cavity, it builds strain and is squeezed out of the compressor output.
Positive displacement
Constructive displacement air compressors use reciprocating pistons to compress air. Gasoline is drawn in for the duration of the suction stroke and compressed by transferring the piston in the opposite direction. It then discharges the compressed air by relocating it in the opposite path. This sort of air compressor is most commonly located in cars, fridges, and other apps that need substantial strain. However, it is not as successful as a centrifugal compressor.
Most modern day air compressors use positive displacement. Constructive displacement types seize a volume of air in the compression chamber and distribute it when the pump is working at highest potential. They are more affordable than their damaging displacement counterparts. Reciprocating screw air compressors are the most common constructive displacement compressors. The reciprocating screw air compressor adopts a water jacket close to the cylinder and is usually employed in processes these kinds of as oil drilling.
A bicycle pump is an example of constructive displacement compression. Air is drawn into the cylinder and compressed by the transferring piston. A piston compressor operates on the identical basic principle, but it utilizes a rotating crankshaft or connecting rod to full the movement of the pistons. There are two types of constructive displacement compressors: one-performing and double-performing. Both varieties operate on the identical basic principle, the two are good displacement compressors. The difference between the two sorts is the pressure ratio.
In air compression, optimistic displacement compression reduces the volume of the fluid and minimizes its viscosity. This final results in larger strain ratios and is utilised in centrifugal, axial, and scroll compressors. Constructive displacement is a typical characteristic of most air compressors. Good displacement compressors offer the same advantages and are a lot more power-effective when used to oil-free of charge and gas purposes. This variety of compression is typically the best option for low-strain programs.
oil totally free
If you’re searching for an air compressor for your organization, contemplate an oil-totally free air compressor. These models offer cleaner, quieter operation than traditional air compressors and need less maintenance. They also meet ISO Course or Class 1 air purity demands. Oil-free air compressors are also quieter, with much less moving elements and significantly less noise. These benefits make oil-cost-free air compressors an perfect solution for many commercial apps.
Air purity is critical in several industries. Even the tiniest fall of oil can hurt manufacturing gear or injury merchandise. The very best way to find an oil-totally free air compressor for your business is to contemplate the process and conclude merchandise. As air quality improves, far more and a lot more businesses are turning to oil-free of charge compressors. Some of the rewards and negatives of these air compressors are:
When choosing an oil-free air compressor, it is crucial to understand the terminology utilised in the industry. Being aware of these phrases will make it less difficult for you to pick the right compressor for your wants. ACTFM, or genuine cubic ft for each minute, is an sector phrase for measuring the sum of air pumped in one minute underneath rated situations. Despite the fact that a easy variety, it can be extremely beneficial in figuring out which sort of air compressor is ideal for your application.
The ISO 8573-1 global common defines air good quality and supplies air purity classifications. The strictest classification is air purity course . A lot of companies claim that oil-free air compressors fulfill this normal. Nevertheless, a course oil-free air compressor does not necessarily suggest that the air is free of charge of contaminants. In simple fact, Class is the benchmark for air purity. Even though zero air high quality is the greatest level, that will not mean it really is completely oil-free.
double performing
A double-acting air compressor is a gadget that makes use of compressed air to make electrical power. Its working theory is based mostly on piston and connecting rod. The connecting rod connects the crankshaft to the piston by way of pins and caps. The piston moves as the piston moves. Rods are normally produced of cast carbon steel. In phrases of services and servicing, double-performing compressors require typical vise upkeep and appropriate cleansing.
The displacement of the compressor is a evaluate of the displacement that the piston can generate in a particular period of time. Displacement is typically expressed in real cubic ft for each moment. The specific calculation depends on the type of cylinder and the configuration of the compressor. One-acting cylinders can have head-end or crank-finish displacement, both of which can be calculated using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 estimate the displacement.
Double-performing air compressors have multiple cylinders and are made of solid iron. They are h2o-cooled and have a mechanical relationship in between the piston and connecting rod. A double-performing compressor compresses air 2 times per revolution of the motor. One particular cylinder moves up, although the other cylinder moves down. The piston moves down, making it possible for air to enter via valve #1. For the duration of the operation of the compressor, the temperature of the air and gas boosts.
Double-acting air compressors normally have large force and are deemed workhorses. Double-performing compressors also function intercooling and double compression. As a outcome, these machines tend to last more time than solitary-performing compressors. Its low speed and twin compression make it a workhorse in the compressor business. Double-performing air compressors are workhorses and flexible devices.
fuel tank pressure switch
You can alter the strain in the air compressor tank by modifying the differential force. You can turn the mainspring clockwise or counterclockwise to improve or decrease the force. This valve will open up when the pressure is minimal sufficient to commence the compressor. If the strain is too reduced, the valve should be closed. The reduce-in and minimize-out pressures must be set to acceptable values. Soon after adjusting the tank stress, check out the hysteresis of the tank pressure swap and established the sought after shutoff force.
If the force in the tank falls under the cut-in level, the tank force swap have to be replaced. You can test the switch with a multimeter. Make positive the switch is not damaged. If you can’t uncover the switch, you can seem at the other sections. If you find any damaged or lacking areas, you must replace them. Otherwise, it may possibly be time to check the tank strain change. You may possibly need to have to disassemble the compressor and remove the switch.
The gas tank strain swap is an essential component of the air compressor. It retains you informed of the sum of air shipped by the compressor. If your tank or tank is destroyed, your readings will be incorrect. If the strain change is destroyed, it will not function appropriately and result in incorrect readings. Luckily, there are some straightforward methods to repair this. To prevent this from going on, maintain the tank stress swap in great problem.
When the air strain in the tank drops to the lower-in force environment, the change makes it possible for electrical power to stream by means of it. This will begin the motor and pump of the air compressor. Then, if the strain in the tank rises previously mentioned the reduce-off degree, the switch will vacation and quit the compressor. This will prevent it from becoming in excess of-pressurized. Electricity circulation will continue to circulation to the motor. Depending on your compressor design, you can modify the reduce-in and reduce-out pressures as required.
power source
The energy offer of the air compressor is very crucial. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can get a switching energy source for about $twenty. No matter which power source you decide on, you should ensure that it can assist the greatest recent of the compressor. You can discover energy supplies in all dimensions, from quarter-horsepower to 5-horsepower.
The voltage necessary for a three-section air compressor will vary. Three-stage air compressors demand 3 independent electrical power cords and a three-period electrical support panel. This is since a normal 120/240-volt electrical provider panel is not enough to energy a a few-period compressor. Additionally, 3-period compressors need 3 separate isolated wires for the engine and motor circuits. A few-stage compressors do not call for a neutral wire.